ADAMS DRIVESHAFT JK FRONT & REAR 1350 CV DRIVESHAFT PACKAGE with GREASABLE U-JOINTS [HEAVY DUTY SERIES]
New Front and Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft.
Application: 2007 to 2016 Jeep JK Wrangler's 2 or 4 Door Models up to a 6" Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example: [Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases] we can accommodate you. We will just need to know this Information after you have ordered.
We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials. Please include the Year, Make, Model, Lift Size, and Tire Size. If we don't have your Measurement we might need you to get us a measurement. You could use this measurement chart below to get the measurement.
This Heavy Duty Greasable 1350 CV Driveshaft will work up to 40" Tall Tire's. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so if you plan on Beating the Hell out of the Jeep then Our Severe Duty 1350 Series with Solid U-joints are the Strongest Made and your best bet.
This Item will include the following parts:
 1350 Greasable U-joint 2 1/2" X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
 1350 Greasable U-joint 2" X .120 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
 1350 Front Transfer Case Output Shaft Yoke.
 1350 Front Dana 44 Pinion Yoke.
 1350 Rear Transfer Case Output Shaft Flange Yoke.
 1350 Rear Dana 44 Pinion Yoke.
 Set of 1350 U-bolts.
 Set of Grade 10 CV Bolts. There is Eight bolts with small heads so they are easier to install.