IMG_0114__86448.1431317156.1280.1280.JPG
Drive Shaft and Components

ADAMS DRIVESHAFT JK Front 1350 CV DRIVESHAFT GREASABLE U-JOINT [HEAVY DUTY SERIES]

642.95

New Front Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshaft With Greasable U-joints Custom made by Adams Driveshaft.

Application: 2007 to 2016 Jeep JK Wrangler's 2 or 4 Door Models up to a 6" Lift. These driveshafts are custom made so if you have altered the front or rear differentials, or transfer case's example [Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases] we can accommodate you. We will just need to know this Information and may have to have you get us a measurement.

We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials. Please include the Year, Make, Model, Lift Size, and Tire Size. If we don't have your Measurement we might need you to get us a measurement. You could use this measurement chart below to get the measurement. 

This Heavy Duty Greasable 1350 CV Driveshaft will work up to 40" Tall Tire's. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so if you plan on Beating the Hell out of the Jeep then Our Severe Duty 1350 Series with Solid U-joints are the Strongest Made and your best bet.

This Item will include the following parts:

[1] 1350 Greasable U-joint 2" X .120 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds.

[1] 1350 Front Transfer Case Output Shaft Yoke.

[1] 1350 Front Dana 44 Pinion Yoke.

[1] Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.

[1] Set of 1350 U-Bolts.

 

Quantity:
Add To Cart
IMG_0114__86448.1431317156.1280.1280.JPG
IMG_0115__37269.1431317144.1280.1280.JPG
IMG_0107__24831.1431317133.1280.1280.JPG
IMG_0110__12411.1431317114.1280.1280.JPG
IMG_0116__61524.1431317102.1280.1280.JPG