ADAMS DRIVESHAFT JK FRONT 1310 CV DRIVESHAFT SPICER SOLID [EXTREME DUTY SERIES]
New Front Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 CV Driveshaft with Spicer Solid U-joints Custom made by Adams Driveshaft.
Application: 2007 to 2016 Jeep JK Wrangler's 2 or 4 Door Models up to a 6" Lift. These driveshafts are custom made so if you have altered the front or rear differentials, or transfer case's example [Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases] we can accommodate you. We will just need to know this Information and may have to have you get us a measurement.
We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials. Please include the Year, Make, Model, Lift Size, and Tire Size.If we don't have your Measurement we might need you to get us a measurement. You could use the measurement chart below to get the measurement.
This Extreme Duty Series Spicer Solid 1310 CV Driveshaft will work up to 37" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1350 Spicer Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
This Item will include the following parts as Picture up Top:
 1310 2" X .120 Wall Rock Crawler CV Driveshaft with Spicer Solid U-joints, and a flange on it that fits your front end so it is easier to install and you do not have to worry about the front crush sleeve. Lifetime Warranty if you twist our Tube or break a Weld.
 American Made Front 1310 Transfer Case Output Shaft Yoke.
 Set of Grade 10 CV Bolts. There is four bolts with small heads small heads so they are easier to install.